TSi Sonic Rigs // Sonic Rig Options & Accessories

Sonic Rig Options & Accessories

The Ultimate Options for the Ultimate Sonic Drill Rig 


Automatic Hydraulic SPT for Sonic Drill Rig

Automatic Hydraulic SPT

Hinges over the hole, has an adjustable blow count and visual verification of anvil fall height conforming to ASTM D-1586. 

One (1) Automatic Hydraulic SPT (conforming to ASTM D-1586) permanently mounted to rig opposite driller. The SPT hinges over the hole, has an adjustable blow count, and visual verification of anvil fall height.


Liberty Model LL6 or LL8 Grout Pump 

Grout pump for Sonic Drill Rigs

Progressive cavity grout pump with hydraulic drive.

One (1) Liberty Model LL6 or LL8 progressive cavity grout pump with hydraulic drive and mounting brackets that fit into receivers on the side or front of the rig (choose your mounting preference).


FMC Bean Pump 

FMC Bean Pump for Sonic Drill Rigs

Piston pump plumbed into drilling system and water tank to enable flushing of drill cuttings from borehole.

One (1) FMC Bean Model W1122D piston pump (1,000 psi pressure rating, 44.2 gpm @ 750 rpm continuous, 53.0 gpm @ 900 rpm intermittent) plumbed into drilling system and water tank to enable flushing of drill cuttings from borehole (this pump is an upgrade to the standard 40 gpm triplex pump included in the base rig price).


Casing Clamp 

Optional Casing Clamp

Added to the bottom of the standard double breakout clamps to prevent outer casing from falling in the hole.

One (1) Casing Clamp added to the bottom of the standard double breakout clamps to support outer casing from falling in the hole. Eliminated the need to change inserts for large diameter casing. 


Water Tank

Mounted water tank for sonic drill rig

One (1) 300 gallon detachable water tank with required hose, fittings, valves, and removable assembly that hooks and locks onto the front of the rig.


Diamond Coring Option 

Diamond coring option for Sonic drill rig

One (1) Diamond Coring Option with dual-speed head for 0 to 600 rpm with 1,623 ft-lbs (2,200 N-m) continuous torque, and 0 to 1,000 rpm with 811 ft-lbs (1,100 N-m) continuous torque; frequency dial on driller console controls rpm; includes mounting/support frame, TSi water swivel with 2 3/8” female API regular threads, and hydraulic hose kit.

Frequency dial on driller console controls rpm; includes mounting and support frame, TSi water swivel, and hydraulic hose kit.


Mudslayer Limited Access M350

Water Well Drilling Equipment

Mudslayer Limited Access M350 | Water Well Drilling Equipment

Mudslayers are the ultimate choice for cost-effective, portable mud-cleaning machines and recycling and environmental protection systems. The Mudslayer M350 has been a powerhouse for cleaning and recycling drilling fluids and cuttings for the water well and geothermal industry. 

The M350 includes the following:

  • 350 Self-Cleaning Tab
  • Caterpillar 24.9 hsp, Tier-4i – AQMD Exempt
  • Two 5″ De-sanding Cones
  • 2’x3’x8.5′ De-sanding Pump with Built-in Mudhopper
  • Radio Control Tracked Undercarriage
  • 4,500 Wet Weight
  • 10″ Lift Pump

Low Clearance Mast 

Sonic Drill rig equipped with low clearance mast

Side jib boom with cable on the drum that actuates over the hole without going above the mast, 13 ft. 6 in. fully lowered. Includes required hydraulic hoses, wiring, and hinge and tilt cylinders.

One (1) Low Clearance Mast including the following:

  • Side jib boom with 250′ of ¼” cable on the drum that actuates over the hole without going above the mast
  • All required hydraulic hoses and wiring installed in the hose management system
  • Cradle with hinge and tilt cylinders to carry the Sonic Head

The Low Clearance Mast is 14 ft 6 ½ in. high fully raised, 13 ft 6 in. high fully lowered, and requires 5′ lengths of tooling (Does Not Include Sonic Head or Wrenches). Since the mast does not include a Sonic Head or Wrenches, you will have to remove and install them each time you swap masts, unless you purchase them installed on the Low Clearance Mast.


Optional Double Breakout Wrenches for Low Clearance Mast 

Double breakout wrenches with flow divider, all cylinders and hydraulic hoses mounted on the Low Clearance Mast.


Terra Sonic Universal Gantry (TUG) Pipe Handling System 

TUG Pipe handling system for compact crawler sonic drill rigs

For hoisted delivery and take-away of all sizes of Terra Sonic Tooling to and from the Sonic Head.

One (1) TUG Pipe Handling System for hoisted delivery and take-away of all sizes of Terra Sonic Tooling (rods, casing and core barrels) to and from the Sonic Head; includes removable rod and casing rack with adjustable divider and fork-channels (additional pipe racks sold separately), retractable hoisting system for transport, and trolley-mounted air hoist all mounted on a base with fork-channels and adjustable support pads.


Terra Sonic Support Crawler 

TSi Crawler Support Vehicle

The H.S.T. system completely eliminates the need for clutch and gear controls, making the Terra Sonic Support Crawler highly maneuverable.


Terra Sonic Support Box Truck 

TSi Support Truck

The Support Box Truck is stabilized and leveled at the jobsite by four hydraulically operated jack legs. The 20’ Van Body includes the following features to assist the drilling crew.